Chinese
English
首页 > Products > Elastomer-metal vibration isolator > Rubber-metal vibration isolator (foot pad)
Engine unit vibration isolatorENGINE MOUTING SYSTEMS
-
Engine unit vibration isolatorENGINE MOUTING SYSTEMS Overview -
This ENGINE MOUNT is made of one conical elastomeric element enclosed in a cast iron assembly.A built-in adjustable stop limits the vertical and lateral displacement during shock.It can be supplied with or without levelling system and with a threaded hole or a threaded stud.Natural frequency: 6 Hz, the engine mount is assembled from a conical elastomer and cast iron components.The product is equipped with adjustable height limit blocks to restrict vertical and longitudinal displacement during impact.This mount has been designed to suspend fixed or mobile generators which require a high level ofvibration isolation and shock protection. The load per mount varies from 600 kg to 2300 kg. This loadrange is covered by 5 different variants (12 to 16) clearly identified by a coloured marking (see table).
This mount is available in two different alternatives depending on the type of upper fixing needed :- 905201 : No levelling system - M24 x 3.00 threaded hole.
- 905202 : Built-in levelling system - M24 x 3.00 threaded hole.
-
Engine unit vibration isolatorENGINE MOUTING SYSTEMS Advantage +
-
Engine unit vibration isolatorENGINE MOUTING SYSTEMS Performance +
-
Engine unit vibration isolatorENGINE MOUTING SYSTEMS Specifications +
Top